xTooldiode10W498×330 mm

xTool S1 10W

Gesamt

8.8

/ 10

xTool S1 is a fully enclosed, Class 1 desktop diode laser engraver and cutter designed for fast, safe, and precise making at home or in small studios. Its motion system reaches up to 600 mm/s, helping you turn ideas into finished projects in minutes rather than hours. Choose between 20 W or 40 W laser modules to balance speed and cutting power, and take advantage of a roomy 498 x 319 mm work area for signage, décor, gifts, and small-batch products. The closed chassis improves fume control and shields users from laser exposure while maintaining clear visibility of the job. With thoughtful accessories and a straightforward workflow, S1 lowers the barrier to professional-quality results for wood, acrylic, leather, and more. If you're upgrading from an open-frame diode or looking for a safer classroom or home solution, the S1's speed, capacity, and certified enclosure make it an excellent all-rounder.

Varianten

10W 20W 40W

Voir maintenant*Fiche technique (PDF)Avis

Rapport qualité-prix

8.0

Paramètres techniques

7.0

Facilité d'utilisation

10.0

Service client

10.0

Table des matières

Données techniques

Type de laser: diode
Puissance de sortie: 10 W
Zone de travail: 498 × 330 mm
Vitesse: 400 mm/s
Type de connexion: USBWIFI
Assistance d'air: Pris en charge
Caméra: Non pris en charge
Caisson: Pris en charge
Logiciel: xTool Creative Space LightBurn
Systèmes d'exploitation: WindowsmacOSiOSiPadOSAndroidLinux
Formats de fichiers: .svg.dxf.png.jpg.ai.pdf.hpgl.plt.rd.jpeg.bmp.tiff.tga.gif
Poids: 20 kg
Garantie: 24 mois

Matériaux : Découpe & Gravure

Type de laser: diode • Puissance de sortie: 10W • Assistance d'air: Pris en charge

Découpe

“Basswood”
“wood”
3 mm
“2 passes”Assistance d'air★
“May scorch” — “Keep speed high”
Sécurité:“Soft wood—monitor for flare-ups” • “smoke
“Birch plywood”
“wood”
5 mm
“2 passes”Assistance d'air★
“Edges will char” — “Go slow and keep air on”
Sécurité:“Use air assist; check for voids” • “smoke
“Cardstock (paper)”
“paper”
0.3 mm
“1 pass fast”★
“High fire risk” — “Do not leave unattended”
Sécurité:“Very flammable—use high speed” • “fire risk
“Cast acrylic”
“acrylic”
3 mm
“multiple passes”Assistance d'air
“Works only on dark acrylic” — “Clear acrylic will not absorb”
Sécurité:“Highly flammable—ensure ventilation” • “irritant fumes
“Cork”
“other”
3 mm
“1 pass fast”Assistance d'air★
“Usable on thin cork” — “Extremely flammable - monitor”
Sécurité:“Cuts easily—very flammable” • “fire risk
“Corrugated cardboard”
“cardboard”
5 mm
“1 pass fast”Assistance d'air★
“Possible on single wall” — “Very flammable material”
Sécurité:“Monitor constantly—can ignite” • “fire risk
“Cotton fabric”
“fabric”
1 mm
“1 pass fast”Assistance d'air★
“High ignition risk” — “Use highest airflow”
Sécurité:“Very flammable—keep speed high” • “fire risk
“EVA foam”
“plastic”
5 mm
“2 passes”Assistance d'air★
“Usable on thin foam” — “Edges may melt slightly”
Sécurité:“Chlorine-free; ventilate for VOCs” • “acrid fumes
“Extruded acrylic”
“acrylic”
3 mm
“multiple passes”Assistance d'air
“Only if opaque or dark” — “Cannot cut clear extruded”
Sécurité:“Melts easily—optimize speed/air” • “acrylic fumes
“Felt (wool)”
“fabric”
3 mm
“1 pass”Assistance d'air★
“Edges may singe” — “Keep air on to cool fibers”
Sécurité:“Prefer wool; avoid synthetics melting” • “smoke
“Leather (Vegetable-tanned)”
“leather”
3 mm
“2 passes”Assistance d'air★
“More char than CO2” — “Clamp to prevent curl”
Sécurité:“Ventilate—burnt hair odor” • “smoke
“MDF”
“wood”
3 mm
“multiple passes”Assistance d'air
“High char and slow” — “Not recommended for quality work”
Sécurité:“Contains resin—use strong ventilation” • “formaldehyde fumes

Gravure

“Anodized aluminum”
“metal”
“1 pass”★
“Good contrast” — “Low power sufficient”
Sécurité:“Safe to mark—coating absorbs beam” • “fine dust”
“Denim (cotton)”
“fabric”
“1 pass”Assistance d'air★
“Fades dye for contrast” — “Good for logos and art”
Sécurité:“Thick cotton—watch for ignition” • “fire risk
“Slate (stone)”
“stone”
“1 pass”★
“Slow but effective” — “High contrast on dark slate”
Sécurité:“Engrave only; dust control recommended” • “stone dust (silica)”