Table of contents
Technical data
- Laser type
- co2
- Output power
- 55 W
- Work area
- 500 × 300 mm
- Speed
- 500 mm/s
- Connection type
- WIFIUSBEthernet
- Camera
- Supported
- Enclosure
- Supported
- Weight
- 41 kg
- Warranty
- 24 months
Materials: Cutting & Engraving
Laser type: co2 • Output power: 55W
Cutting
- “Leather (Chrome-tanned)”“leather”””
“Do not laser chrome tanned leather” — “Toxic gases from chromium salts”
Safety:“DO NOT LASER—toxic chromium gases” • “cyanide gas - “PVC (Polyvinyl Chloride)”“plastic”””
“Never laser PVC” — “Releases chlorine gas and acid vapor”
Safety:“NEVER LASER—releases chlorine gas” • “chlorine gas
Engraving
- “Anodized aluminum”“metal”“1 pass”★
“Removes anodized layer” — “Exposes silver metal beneath”
Safety:“Safe to mark—coating absorbs beam” • “fine dust” - “Glass”“glass”“1 pass”★
“Matte frost” — “Use wet paper to reduce chips”
Safety:“Engrave only; cannot cut” • “glass dust - “Leather (Chrome-tanned)”“leather”””
“Do not laser chrome tanned leather” — “Health hazard and machine corrosion”
Safety:“DO NOT LASER—toxic chromium gases” • “cyanide gas - “PVC (Polyvinyl Chloride)”“plastic”””
“Never laser PVC” — “Corrodes optics and mechanics”
Safety:“NEVER LASER—releases chlorine gas” • “chlorine gas - “Slate (stone)”“stone”“1 pass”★
“Light gray contrast” — “Clean dust after job”
Safety:“Engrave only; dust control recommended” • “stone dust (silica)” - “Stainless steel”“metal”“1 pass”★
“Black mark with spray” — “Requires metal marking compound”
Safety:“Use marking spray with CO2; fiber ideal” • “metal fumes (chromium
Approximate values; actual results depend on material batch, focus, speed, and settings.
Rating
8.0/ 10
Ø from 4 categories
Price/performance8.0/10
Technical parameters8.0/10
User-friendliness8.0/10
Customer service8.0/10