xTool M1
Gesamt
9.0
/ 10
Preis/Leistung
8.0
Technische Parameter
8.0
Nutzerfreundlichkeit
10.0
Kundenservice
10.0
Inhaltsverzeichnis
Technische Daten
- Laserart
- diode
- Ausgangsleistung
- 10 W
- Arbeitsfläche
- 385 × 300 mm
- Geschwindigkeit
- 250 mm/s
- Connection type
- USBWLAN
- Air Assist
- Unterstützt
- Kamera
- Unterstützt
- Gehäuse
- Unterstützt
- Software
LightBurn
xTool Creative Space- Betriebssysteme
- WindowsmacOSLinuxiOSiPadOSAndroid
- Dateiformate
.ai.svg.dxf.pdf.hpgl.plt.rd.png.jpeg.bmp.tiff.tga.gif.jpg- Gewicht
- 9.8 kg
Materialien: Schneiden & Gravieren
Laserart: diode • Ausgangsleistung: 10W • Air Assist: Unterstützt
Schneiden
- “Basswood”“wood”3 mm“2 passes”Air Assist★
“May scorch” — “Keep speed high”
Sicherheit:“Soft wood—monitor for flare-ups” • “smoke - “Birch plywood”“wood”5 mm“2 passes”Air Assist★
“Edges will char” — “Go slow and keep air on”
Sicherheit:“Use air assist; check for voids” • “smoke - “Cardstock (paper)”“paper”0.3 mm“1 pass fast”★
“High fire risk” — “Do not leave unattended”
Sicherheit:“Very flammable—use high speed” • “fire risk - “Cast acrylic”“acrylic”3 mm“multiple passes”Air Assist
“Works only on dark acrylic” — “Clear acrylic will not absorb”
Sicherheit:“Highly flammable—ensure ventilation” • “irritant fumes - “Cork”“other”3 mm“1 pass fast”Air Assist★
“Usable on thin cork” — “Extremely flammable - monitor”
Sicherheit:“Cuts easily—very flammable” • “fire risk - “Corrugated cardboard”“cardboard”5 mm“1 pass fast”Air Assist★
“Possible on single wall” — “Very flammable material”
Sicherheit:“Monitor constantly—can ignite” • “fire risk - “Cotton fabric”“fabric”1 mm“1 pass fast”Air Assist★
“High ignition risk” — “Use highest airflow”
Sicherheit:“Very flammable—keep speed high” • “fire risk - “EVA foam”“plastic”5 mm“2 passes”Air Assist★
“Usable on thin foam” — “Edges may melt slightly”
Sicherheit:“Chlorine-free; ventilate for VOCs” • “acrid fumes - “Extruded acrylic”“acrylic”3 mm“multiple passes”Air Assist
“Only if opaque or dark” — “Cannot cut clear extruded”
Sicherheit:“Melts easily—optimize speed/air” • “acrylic fumes - “Felt (wool)”“fabric”3 mm“1 pass”Air Assist★
“Edges may singe” — “Keep air on to cool fibers”
Sicherheit:“Prefer wool; avoid synthetics melting” • “smoke - “Leather (Vegetable-tanned)”“leather”3 mm“2 passes”Air Assist★
“More char than CO2” — “Clamp to prevent curl”
Sicherheit:“Ventilate—burnt hair odor” • “smoke - “MDF”“wood”3 mm“multiple passes”Air Assist
“High char and slow” — “Not recommended for quality work”
Sicherheit:“Contains resin—use strong ventilation” • “formaldehyde fumes
Gravieren
- “Anodized aluminum”“metal”“1 pass”★
“Good contrast” — “Low power sufficient”
Sicherheit:“Safe to mark—coating absorbs beam” • “fine dust” - “Denim (cotton)”“fabric”“1 pass”Air Assist★
“Fades dye for contrast” — “Good for logos and art”
Sicherheit:“Thick cotton—watch for ignition” • “fire risk - “Slate (stone)”“stone”“1 pass”★
“Slow but effective” — “High contrast on dark slate”
Sicherheit:“Engrave only; dust control recommended” • “stone dust (silica)”
Richtwerte; tatsächliche Ergebnisse hängen von Materialcharge, Fokus, Geschwindigkeit und Einstellungen ab.
Bewertung
9.0/ 10
Ø aus 4 Kategorien
Preis/Leistung8.0/10
Technische Parameter8.0/10
Nutzerfreundlichkeit10.0/10
Kundenservice10.0/10